Apollo 50 Specifications

Operating Manual APOLLO® 50 - 1,3 bar APOLLO® 100 - 1,3 bar APOLLO® 150 - 1,3 bar

Vessel 6 Structure of the Level Indicator Determination of the Vessel Filling Level • by reading the scale of the level indicator • by dete

Vessel 7 drawing 78202700 APOLLO 50, 100, 150 Filling Level Curve

Vessel 8 Automatic Pressure Build-up Control System (Option) Item Description 1 Pressure build-up line 2 Pressure build-up valve 3 Pressure b

Vessel 9 Item Designation Subject number Subject number Subject Number APOLLO® 50 – 1,3 bar 78202700 APOLLO® 100 – 1,3 bar 78202701 APOLL

Safety 10 Caution when handling liquid nitrogen! Observe the following documents and procedures: • Leaflet „How to handle nitrogen“ • Safety

Safety 11 3.4 Safety Data Sheet “Nitrogen refrigerated“

Safety 12

Safety 13

Safety 14

Safety 15 ACCIDENT LEAFLET FOR ROAD TRANSPORTATION ADR/GGVS Class 2 CRYOGENIC LIQUEFIED GASES: suffocating non-toxic, non-caustic, non-inflamma

Safety 16 The tanks have to labelled according to the regulations for hazardous goods for the respective employment. Cryogenic liquefied Gases

Transportation and Assembly 17 Transportation of the Vessel • Observe safety instructions. • Keep upright. • Lift and set down carefully. •

Operation 18 The vessel can be commissioned immediately after delivery. Caution ! • Observe safety instructions. • Use filling line with safe

Operation 19 Disassembly of the EK Siphon Danger of Accidents! Dismantle the EK Siphon only with unpressurized vessel. 1. Close the pressure

Operation 20 Filling 1. Mount the EK Siphon. 2. Connect the filling line from the tank to the filling/withdrawal valve. 3. Open the waste ga

Operation 21 Withdrawal 1. Move the vessel to the place of withdrawal. 2. Mount the EK Siphon. 3. Mount the delivered transfer hose or

Operation 22 The operating pressure in the vessel allows for withdrawing the liquid gas. Vessel name Apollo® maximum operating pressur

Operation 23 Open the waste gas/overflow valve, until the operating pressure at the pressure gauge will be achieved. Subsequently, close the val

Maintenance / Repair 24 • With conventional use, the vessel does not require any special maintenance or attendance. • Regular examinations with

Faults 25 Immediately put the vessel out of operation, in case that • the fittings are leaky. • the safety valve does blow off intensively.

Contents I Page 1 Introduction 1 1.1 Symbols in the Manual 1 1.2 Principle 1 1.3 Delivery 1 2 Vessel 2 2.1 Main Components 2 2.2 Specifications of

Faults 26 Fault Cause Trouble shooting Iced-up valve This is operational with opened valve. - The valve is not closed completely. Close t

Warranty 27 Our warranty requires the proper use of the device according to the regulations. When exchanging parts, only original spare parts ha

Cryotherm GmbH & Co. KG Germany Euteneuen 4 D-57548 Kirchen (Sieg) Tel.: (0049-2741) 9585-0 • Fax (0049-2741) 6900 Cryotherm Gm

Introduction II Appendix: name plate Certificate/Declaration of Conformity List of pressure device and equipment

Introduction 1 The APOLLO® Vessel is a vacuum super insulated pressure vessel made of corrosion-resistant stainless steel. It is intended exclu

Vessel 2 • Coaxial arrangement of the pressure vessel in the outer vessel with neck suspension and vacuum super insulation • Pressure build-u

Vessel 3 Examination Seat tightness and set pressure of the safety valve may only be examined by means of the bubble method outlined below. Co

Vessel 4 Caution! The positive pressure relief and seal-off device protects the vacuum room from overpressure. Re-evacuation may only be carried

Vessel 5 Structure of the Standard Transfer Hose Item Description 1 Flexible corrugated hose with a corrosion-resistant stainless steel braid