search

Apollo 1600 Troubleshooting Guide Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 8
8
Extend Limit Screw
To
Extend More
Turn Extend Limit
Screw Counter-
Clockwise.
STEP 6
Limit Switch Adjustment
To
Retract More
Turn Retract
Limit Screw
Clockwise
To
Retract Less
Turn Retract
Limit Screw
Counter-
Clockwise.
To
Extend Less
Turn Extend
Limit Screw
Clockwise.
Remove limit switch end caps
Cycle the operator and adjust limits as
required. If the operator opens
automatically after closing, extend less
until gate remains closed.
Do not retract the extension tube too far
or the retract limit switch will not be
activated. (You can depress the
Limit
Switch Test
button on the 833/834 to
see when the actuator has reached it’s
limit)
1600 Adjustments
As you open and close the gates, you
will notice that the slave side moves 2-3
seconds slower than the master.
Tip:
By welding stop tabs on the top
and bottom of the master side, the two
gates may now be adjusted so the slave
gate will close against the stop tabs of
the master gate and create enough
tension to prevent gates from moving
back and forth.
STEP 5 GATE BRACKET INSTALLATION
Activate push button on the side of the control box and
extend the actuator until it stops (
PULL TO OPEN
only, leave actuator retracted for PUSH TO OPEN
).
WARNING: Do not let extension tube rotate as it
extends. Do not insert fingers or tools in the hole at
the end of the extension tube .
Align the hole in the end of the actuator extension tube
with the holes in the gate bracket and locate gate
bracket mounting position with the gate in the closed
position. Weld or bolt the gate bracket to the gate using
3/8” bolts, lock washers, and nuts.
Tip:
Tack weld or C clamp at first if uncertain about
location. Run the unit through a complete cycle to
insure proper operation then mount permanently .
Bolt the actuator to the gate bracket as shown.
Bracket should attach 52” - 54” from the center of the
hinge.
1/2” x 3”
Bolt
1/2” Lock Nut
1/2” Washer
(2 places)
Retract Limit Screw
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments
  • Electron Hobart Applied Systems Engineering Terk Kollmorgen
  • Archos TVs & monitors Haier Small kitchen appliances HP LCD TVs Garmin Holders Omron Network switches
  • Karcher B 80 W Bp LG BH7530T Samsung SGH-J210 Jvc KD-SX992R HSM SECURIO B24
  • Bosch GTC 400C Manual Samsung 1000W User Manual M-Audio IE-40 User Manual Panasonic WJ-NV200 Installation Guide