Apollo Cascade Specifications download pdf (Page 8)

Electrical Speciﬁcations

WARNING!

All electrical hookups must be performed by a licensed electrician! There is a

shock hazard. DO NOT PROCEED with connecting this spa unless you are a

licensed electrician. Any and all information contained herein is for reference

only.

Sub Panel

Wiring Diagram

Example

IMPORTANT CONNECTIONS:

Neutral of the GFCI must be

connected to the neutral bus.

Neutral from the spa must be

connected to the breaker.

To Spa

From

Electrical Box

Electrical Installation Instructions

APOLLO Spas MUST BE WIRED IN ACCORDANCE WITH ALL

APPLICABLE LOCAL ELECTRICAL CODES. ALL ELECTRICAL WORK

SHOULD BE DONE BY AN EXPERIENCED, LICENSED ELECTRICIAN

AND APPROVED BY A LOCAL BUILDING/ELECTRICAL

INSPECTION AUTHORITY.

The electrical supply must satisfy the requirements of the spa as marked on the certiﬁcation label

which is located adjacent to the spa controller (pack). If the ratings are not legible or cannot be

found, please contact the factory for assistance. - DO NOT GUESS!

WARNING: Removing or bypassing any GFCI breaker will result in an unsafe spa and will void the spa’s warranty.

IMPORTANT: Should you ever ﬁnd the need to move or relocate your Apollo spa, it is essential that you understand and apply these

installation requirements. Your Apollo spa

has been carefully engineered to provide maximum safety against electric shock.

Remember, connecting the spa to an improperly wired circuit will negate many of its safety features.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Apollo Cascade Specifications Page 8